INSTALLATION METHODS
                                   for Formed Plastic Letters
Flange Mount FLANGE is a flat 3/16 to 1/4" perimeter on the letter return into which hole can be drilled. Secure with screws or nails. Wider flange available upon request. Not for letters under 6 inches.
PICTURE OF PLAIN LETTER PLAIN letters have no installation hardware. This choice will not have any mounting hardware attached or shipped with letters. Please be certain this is the mounting method you will need.
-- This choice is NOT recommended.
PICTURE OF PADDED LETTER PADS are plastic disks on the rear of the letters. Secure the letters to the wall with silicone adhesive (see accessories). Adjustable or flush pads available upon request.
-- This is a very common choice.
PICTURE OF STUDDED LETTER STUDS are metal threaded posts on the rear of the letters. Specify stud lengths of 1, 2, 3, 4, 5, or 6 inches. Specify if studs need to be in line for brick or block wall mortar joints.
-- This is a very common choice.
PICTURE OF COMBINATION LETTER COMBINATIONS have pads at the bottom and pad/stud combinations at the top of the letter. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6 inches.
PICTURE OF COMBINATION ALL LETTER COMBINATION ALL have stud though pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6 inches.

 

©1996-2011 Sign Letters, Inc. (SignLettersOnline)