Sign Letters  -  Metal Letters  -  Plastic Letters  -  Changeable Sign Letters  -  Aluminum Lettering  -  ZIP Change Letters  -  Buy sign letters online from this store

 
Pronto Track Installation
  
1. Drill or route horizontal oblong or oversized holes in the track as in the illustration below.
Oblong holes in Pronto Track
2. Using a sheet metal screw, because of its squared shoulder; put the screw in the center of the horizontal hole.
3. Do not tighten the screw. Leave it approximately 1/4 to 1/2 turn loose.
4. When all the screws are in the track you should be able to wiggle horizontally a small distance.
 5. Now the track is able to expand or contract with temperture changes, and shouldn't buckle or warp.
       
TRACK SPACING    
  Measurements are from the top of the top track to the bottom of the bottom track.
Pronto Track Profile      
4 Inch Letter 1 Line of Copy 6 1/2"
  2 Lines of Copy 12 3/8"
Visible Opening 4 1/4" 3 Lines of Copy 18 1/4"
  4 Lines of Copy 24 1/8"
  5 Lines of Copy 30"
 
 
 
6 Inch Letter 1 Line of Copy 8 1/2"
  2 Lines of Copy 16 3/8"
Visible Opening 6 1/4" 3 Lines of Copy 24 1/4"
  4 Lines of Copy 32 1/8"
  5 Lines of Copy 40"
 
 
 
8 Inch Letter 1 Line of Copy 11 1/2"
  2 Lines of Copy 22 3/8"
Visible Opening 9 1/4" 3 Lines of Copy 33 1/4"
  4 Lines of Copy 44 1/8"
  5 Lines of Copy 55"
 
 
 
10 Inch Letter 1 Line of Copy 13 1/2"
  2 Lines of Copy 26 3/8"
Visible Opening 11 1/4" 3 Lines of Copy 39 1/4"
  4 Lines of Copy 52 1/8"
  5 Lines of Copy 65"
 
 
 
12 Inch Letter 1 Line of Copy 15 1/2"
  2 Lines of Copy 30 3/8"
Visible Opening 13 1/4" 3 Lines of Copy 45 1/4"
  4 Lines of Copy 60 1/8"
  5 Lines of Copy 75"
 
 
 
15 Inch Letter 1 Line of Copy 18 1/2"
  2 Lines of Copy 36 3/8"
  Visible Opening 16 1/4" 3 Lines of Copy 54 1/4"
    4 Lines of Copy 72 1/8"
    5 Lines of Copy 90"